RAMS builder

Build your RAMS online

Bathroom tiling (occupied home): answer the questions and preview a RAMS written for that job, free. Download it as an editable Word file for £9.99.

Build your RAMS online →

Rather not write it yourself? We'll write your RAMS for the job for £79, or check and fix the one you've got for £49. Back to you within 2 working days. See the RAMS services →

Typical jobs in a RAMS for tilers

A RAMS (risk assessment and method statement) should describe the actual job, not the trade in general. These are the jobs tilers are most often asked to write one for:

Main hazards and control measures for tilers

These are the hazards that usually belong in the risk assessment, with the kind of controls a site manager expects to see. Adjust them for your job; every site is different.

HazardTypical control measures
Silica dust from cutting and grinding tilesWet cutting or on-tool extraction, suitable RPE, and cutting outside or in a separate area where possible.
Electrical safety with wet cutters110V or RCD-protected supply, leads kept out of water, and pre-use checks.
Adhesives and groutsGloves to prevent dermatitis, and COSHH assessments from the safety data sheets (especially epoxy grouts).
Knee and back strain from kneelingKnee pads, regular breaks and changes of position.
Manual handling heavy and large-format tilesTeam lifts, suction lifters and carrying frames for large-format tiles.
Cuts from sharp tile edgesCut-resistant gloves when handling cut tiles, and safe disposal of offcuts.

What a main contractor usually expects to see

Formats vary, but when a site manager reads a RAMS from tilers, they usually look for:

Generic, copy-and-paste RAMS are the ones that get sent back. See the RAMS mistakes that get documents rejected.

Worked example: one method statement step

A method statement sets out the job in the order it happens. Here’s an illustrative extract for one step. Yours should match your own job and site.

Method statement extract · Tilers

Step 3: Cutting tiles

  1. Set up the wet cutter in the agreed cutting area, on a stable surface, with a 110V or RCD-protected supply.
  2. Check the blade, guard and water supply before use.
  3. Wear eye protection, RPE and hearing protection while cutting.
  4. Clean slurry with a wet method or vacuum, never by dry sweeping.
  5. Keep the leads and plugs out of standing water and switch off when not in use.

Each step is short and specific, and names the control at the point it’s needed. New to method statements? Read what is a method statement?

RAMS FAQs for tilers

Do tilers need a RAMS?

Domestic customers rarely ask, but main contractors and commercial clients often do. You must always assess and manage the risks, and businesses with five or more employees must record the main findings.

Is cutting tiles a silica risk?

Cutting and grinding many tiles, especially porcelain and stone, can release silica dust. HSE recommends controlling dust at source and using suitable RPE. See HSE's construction health risks guidance.

Do I need COSHH assessments for adhesives and grout?

Yes for hazardous products. Use each product's safety data sheet. See HSE's COSHH guidance.

Get your RAMS sorted. Our Tilers Health & Safety Pack (£9.99, editable Word) includes a health and safety policy, five risk assessments and a method statement written for tilers, ready to edit for your job. Short of time? We’ll write your RAMS for you (£79, back within 2 working days), or review and fix the one you’ve already got (£49). Prefer to answer a few questions? Build your RAMS online: free preview, £9.99 for the editable Word file.

Useful HSE guidance: HSE: construction health risks · HSE: COSHH · HSE: electrical safety.

This is general guidance, not legal advice. Check the current HSE guidance and what your client asks for.

Continue readingRAMS for other trades→Risk assessment and method statement: what’s the difference?