Build your RAMS online
Gas boiler replacement (occupied home): answer the questions and preview a RAMS written for that job, free. Download it as an editable Word file for £9.99.
Rather not write it yourself? We'll write your RAMS for the job for £79, or check and fix the one you've got for £49. Back to you within 2 working days. See the RAMS services →
Typical jobs in a RAMS for gas engineers and plumbers
A RAMS (risk assessment and method statement) should describe the actual job, not the trade in general. These are the jobs gas engineers and plumbers are most often asked to write one for:
- Boiler installs, replacements and servicing
- Central heating and hot water systems
- Bathroom and kitchen plumbing
- Commercial pipework and plant room work
- Gas appliance installs and safety checks
Main hazards and control measures for gas engineers and plumbers
These are the hazards that usually belong in the risk assessment, with the kind of controls a site manager expects to see. Adjust them for your job; every site is different.
| Hazard | Typical control measures |
|---|---|
| Gas escape, fire and carbon monoxide | Gas work only by Gas Safe registered engineers. Isolate, purge and tightness test, and check flues and ventilation before handover. |
| Fire from soldering and brazing | Hot works permit where the site uses one, heat mats, extinguisher to hand, and a fire check after finishing. Consider press-fit fittings to avoid heat. |
| Asbestos in older properties (flues, lagging, boiler cupboards) | Check the asbestos survey before disturbing old flues, panels or pipe lagging. Stop and report anything suspect. |
| Lofts, voids and cramped spaces | Boards over joists, lighting, breaks in hot lofts. Treat any genuinely confined space with a specific assessment. |
| Manual handling boilers and cylinders | Two-person lifts, trolleys or stair climbers for heavy units. |
| Scalds and water damage | Drain down and isolate before cutting in, protect floors, and warn occupants about hot water. |
What a main contractor usually expects to see
Formats vary, but when a site manager reads a RAMS from gas engineers and plumbers, they usually look for:
- Gas Safe registration and the engineer's ID card for any gas work
- Isolation, drain-down and testing steps
- Hot works controls and permit arrangements
- How occupants are protected and kept informed
- Asbestos information checked before intrusive work
- Commissioning and handover records
- Site-specific details: address, dates, access route, welfare and emergency arrangements
Generic, copy-and-paste RAMS are the ones that get sent back. See the RAMS mistakes that get documents rejected.
Worked example: one method statement step
A method statement sets out the job in the order it happens. Here’s an illustrative extract for one step. Yours should match your own job and site.
Step 5: Disconnecting the old boiler
- Tell the occupant the heating, hot water and gas will be off and for roughly how long.
- Isolate the gas at the appliance valve and the meter, and cap off. Isolate and lock off the electrical supply.
- Isolate and drain the system into a suitable drain, protecting floors.
- Check the asbestos information before removing the old flue or any old casing.
- Remove the boiler with a two-person lift and take it out by the agreed route.
Each step is short and specific, and names the control at the point it’s needed. New to method statements? Read what is a method statement?
RAMS FAQs for gas engineers and plumbers
Do plumbers need a RAMS?
For many commercial and social housing jobs, the client will ask for one. In law, you must assess and manage the risks of your work, and businesses with five or more employees must record the main findings.
Does a RAMS replace Gas Safe registration?
No. HSE says anyone working on gas appliances or fittings as part of their business must be on the Gas Safe Register. The RAMS describes how you'll do the job safely. See HSE's gas safety guidance.
What should a hot works section include?
The area, the work, fire precautions (extinguisher, heat mats, removing combustibles), any permit required by the site, and a check of the area after you finish.
Get your RAMS sorted. Our Gas Engineers & Plumbers Health & Safety Pack (£9.99, editable Word) includes a health and safety policy, five risk assessments and a method statement written for gas engineers and plumbers, ready to edit for your job. Short of time? We’ll write your RAMS for you (£79, back within 2 working days), or review and fix the one you’ve already got (£49). Prefer to answer a few questions? Build your RAMS online: free preview, £9.99 for the editable Word file.
Useful HSE guidance: HSE: gas safety · HSE: asbestos · HSE: manual handling.
This is general guidance, not legal advice. Check the current HSE guidance and what your client asks for.