RAMS builder

Build your RAMS online

Vinyl and LVT installation (occupied premises): answer the questions and preview a RAMS written for that job, free. Download it as an editable Word file for £9.99.

Build your RAMS online →

Rather not write it yourself? We'll write your RAMS for the job for £79, or check and fix the one you've got for £49. Back to you within 2 working days. See the RAMS services →

Typical jobs in a RAMS for floor layers

A RAMS (risk assessment and method statement) should describe the actual job, not the trade in general. These are the jobs floor layers are most often asked to write one for:

Main hazards and control measures for floor layers

These are the hazards that usually belong in the risk assessment, with the kind of controls a site manager expects to see. Adjust them for your job; every site is different.

HazardTypical control measures
Asbestos in old floor tiles and adhesivesIn older buildings, ask for the asbestos survey before uplifting tiles or scraping old bitumen adhesive. Stop and report anything suspect.
Adhesives, primers and smoothing compoundsCOSHH assessments from the safety data sheets, ventilation, gloves, and dust control when mixing bagged compounds.
Knee and back strain from long periods kneelingKnee pads, regular breaks and changes of position, and long-handled tools where possible.
Manual handling rolls, boxes and sheet materialsPlan deliveries close to the work area, use trolleys and team lifts for heavy rolls.
Cuts from knives and bladesRetractable or safety knives, cut away from the body, cut-resistant gloves where needed, blades disposed of safely.
Dust and noise from sanding and preparationOn-tool extraction, suitable RPE and hearing protection; keep others out of the area.

What a main contractor usually expects to see

Formats vary, but when a site manager reads a RAMS from floor layers, they usually look for:

Generic, copy-and-paste RAMS are the ones that get sent back. See the RAMS mistakes that get documents rejected.

Worked example: one method statement step

A method statement sets out the job in the order it happens. Here’s an illustrative extract for one step. Yours should match your own job and site.

Method statement extract · Floor Layers

Step 2: Uplift and preparation

  1. Confirm the area is handed over, empty and closed to other trades.
  2. Check the asbestos survey covers the floor finish and adhesive. If it doesn't, stop and ask.
  3. Lift the old covering, bag waste and remove it by the agreed route.
  4. Mix smoothing compound in a ventilated area, with RPE while pouring powder.
  5. Put up “wet floor, keep off” signs and barriers until the compound has cured.

Each step is short and specific, and names the control at the point it’s needed. New to method statements? Read what is a method statement?

RAMS FAQs for floor layers

Do flooring contractors need a RAMS?

Not every domestic job legally needs a written one, but you must assess and manage the risks, and businesses with five or more employees must record the main findings. Commercial clients and main contractors usually ask for one before you start.

What COSHH assessments does a floor layer need?

One for each hazardous product you use, typically adhesives, primers, smoothing compounds and finishes. Use the manufacturer's safety data sheet and see HSE's COSHH guidance.

Is old vinyl flooring likely to contain asbestos?

Some older floor tiles and adhesives do. You can't tell by looking, so check the asbestos survey before lifting. See HSE's asbestos guidance.

Get your RAMS sorted. Our Floor Layers Health & Safety Pack (£9.99, editable Word) includes a health and safety policy, five risk assessments and a method statement written for floor layers, ready to edit for your job. Short of time? We’ll write your RAMS for you (£79, back within 2 working days), or review and fix the one you’ve already got (£49). Prefer to answer a few questions? Build your RAMS online: free preview, £9.99 for the editable Word file.

Useful HSE guidance: HSE: COSHH · HSE: asbestos · HSE: manual handling.

This is general guidance, not legal advice. Check the current HSE guidance and what your client asks for.

Continue readingRAMS for other trades→Risk assessment and method statement: what’s the difference?